Event Information |
MSE Seminar: Probing Nanoscale Damage Gradients in Irradiated Metals using Nano-mechanical Test Tech Speaker: Siddhartha Pathak, Assistant Professor, Chemical and Materials Engineering, Unviersity of Nevada, Reno Title: Probing Nanoscale Damage Gradients in Irradiated Metals using Nano-mechanical Test Techniques Abstract: Materials with modified surfaces – either as a consequence of a graded microstructure, or due to an intentional alteration of the surface – are of increasing interest for a variety of applications ranging from enhanced wear and corrosion resistance, superior thermal and biomedical properties, higher fracture toughness, and reduced stress intensity factors etc. Quantifying the resulting property gradations poses a significant challenge, especially when the changes occur over small (sub-micrometer) depths, such as during ion-irradiation. The first half of this presentation will focus on a novel indentation approach which, together with the corresponding local structure information obtained from electron backscatter diffraction (EBSD), allows us to probe nanoscale surface modifications in solid materials and quantify the resulting changes in its mechanical response. Using tungsten as a specific example we discuss the capabilities of spherical nanoindentation stress-strain curves, extracted from the measured load-displacement dataset, in characterizing the elastic response, elasto-plastic transition, and onset of plasticity in ion-irradiated tungsten under indentation, and compare their relative mechanical behavior to the unirradiated state. Time permitting we will also use a series of examples to show the capabilities of our nanoindentation techniques in (a) characterizing the local indentation yield in individual grains of deformed polycrystalline metallic samples and relating them to increases in the local slip resistances, (b) correlating the stored energy differences of individual grains to their Taylor factors as a function of imposed cold work, and (c) understanding the role of interfaces (grain boundaries) in the deformation of a polycrystalline sample. The second part of this presentation will focus on microscale testing under extreme conditions of pressure, temperature and strain rate. In particular we will look at the response of body centered cubic (bcc) Mg, stabilized at ambient pressures in a Mg/Nb multilayer nanocomposite. We investigated the structure of the hitherto-unknown bcc Mg phase in the nanocomposite under high pressures in a diamond anvil cell experiment using synchrotron radiation x-ray diffraction. Additionally, Pathak's team performed high temperature micro-pillar compression tests and strain rate jump tests on Mg (bcc)/Nb 5nm/5nm and Mg (hcp)/Nb 50nm/50nm nanolaminates to compare the responses of hcp vs. bcc Mg. Results from these tests were analyzed in terms of the measured activation energies and activation volumes from sub-micrometer sized Mg/Nb multilayer nanocomposites. Bio:
|