December 3, 2024 UMD Home FabLab AIMLab


COLLEGE PARK-- Engineers at the University of Maryland have created a new material that’s as insulating as Styrofoam, but stronger and much more environmentally friendly.

“This can insulate better than most other current thermal insulators, including Styrofoam. It is extremely promising to be used as energy efficient building materials,” said Tian Li, a postdoc student with Liangbing Hu’s group in the UMD department of materials science and engineering. She was named to Forbes Magazine’s “30 under 30” list of accomplished young adults in 2018.

Wood “conducts” heat along the channels that were used when the tree was alive to shuttle water and nutrients from roots to leaves.  However, heat trying to cross the wood grain is blocked.  With the wood oriented in the right direction, heat could be blocked or transmitted as the designer desires.

To test how much heat was insulated, they measured the temperature on one side of the nanowood, while on the other side of the wood, shining a light in one test and applying heat in another test. The nanowood insulated better in both cases. The wood blocked at least 10 degrees more heat than styrofoam or silica aerogel, which had been awarded the Guinness World Record for ‘best insulator’. The nanowood, which is white, also effectively reflects sunlight.

They also tried to crush it and found that, in one direction, the nanowood was 30 times stronger than commercially used thermal insulation materials such as Styrofoam, aerogel or other foams made of cellulose.

Nanowood’s tiny fibers don’t cause allergic reactions or irritate lung tissues, unlike glass or wool insulators.

The secret to the nanowood is the removal of lignin, the part that makes it brown and rigid. The team also removed some of the short fibers that tangle themselves in with the cellulose fibers that make up the scaffolding-like base structure of the wood. The aligned cellulose fibers then bond with each other and results in a high mechanical strength.

The team in the US was assisted by Lars Wågberg of the KTH Royal Institute of Technology, in Stockholm, Sweden. This member of the Wallenberg Wood Science Centre helped analyze the behavior of cellulose fibers in the nanowood.

“My research program experiments with nature’s nanotechnology that we see in wood,” said Liangbing Hu, an associate professor in the department of materials science and engineering at the University of Maryland, a member of the Maryland Energy Innovation Institute, and a member of the Maryland NanoCenter. “We are reinventing ways to use wood that could be useful in constructing energy efficient and environmentally friendly homes.” These wood-based nanotechnologies are being commercialized through Inventwood, a UMD spinoff company of Hu’s research group.

The team has made the insulating nanowood in blocks and in a thin, flexible or rollable, form.

Photos of the wood's microstructures were produced in the Advanced Imaging and Microscopy (AIM) Lab, part of the Maryland NanoCenter, which is headquartered in College Park.

The research was published in the journal Science Advances on March 9.

 

 

‘Anisotropic, lightweight, strong, and super thermally insulating nanowood with naturally aligned nanocellulose’

 

Li et al, Science Advances, 2018

 

http://dx.doi.org/



Related Articles:
Micro-reactor Produces Quality Nanoparticles
Thin Wood Film Amplifies Speaker Technology
'Wood' You Like Some Fresh Water?
Cooling Wood: An Eco-Friendly Building Material
Wood-based Technology Creates Electricity from Heat
Wood Provides a Spongy, Eco-Friendly Replacement for Synthetic Materials
Super Wood Could Replace Steel
UMD Researchers Work to Mitigate Water Scarcity Crisis with Solar-Powered Devices Made of Wood
Wood filter removes toxic dye from water
A peek under a hybrid’s hood reveals wood?

March 9, 2018


«Previous Story  

 

 

Current Headlines

CALCE Receives ULRI Research Award for Thermal Runaway Prevention in Batteries

World Premiere of Video on Battery Safety by Prof. Michael Pecht at OECD

Former MEI2 energy seed grant discusses 3D printing of advanced ceramics

UMD, Partners Receive $31M for Semiconductor Research

Brick by Brick: The Clark School Celebrates LGBTQ+ Engineers

Maryland Engineering and Partners Win $26M to Develop Better HVACR Systems and Fight Climate Change

Researchers’ Battery Breakthrough Improves Performance at Lower Costs

ION honored by federal and state officials

Ghodssi Honored With Gaede-Langmuir Award

Maryland Engineers Recognized with UMD Faculty Honors

 

Colleges A. James Clark School of Engineering
The College of Computer, Mathematical, and Natural Sciences

Communicate Join Email List
Contact Us
Follow us on TwitterTwitter logo

Links Privacy Policy
Sitemap
RSS

Copyright The University of Maryland University of Maryland
2004-2024